R-panel
Standard profile for open framing and budget builds.
Metal roofing
R-panel and PBR metal roofs cover a lot of square footage for the money, which is why they are on so many shops, barns and commercial buildings around Orange and Lake County.

On residential jobs we use R-panel mostly for detached garages, workshops and back porch roofs where a utility look fits. Typical cost in Orlando runs $6.15 to $9.80 per sq ft installed on open framing, and the roof line answers 24/7 at (407) 783-0064.
R-panel has tall trapezoid ribs that let it span between purlins, so it is a natural fit for steel buildings, pole barns and warehouse roofs. PBR is the same profile with a purlin bearing leg at the side lap, which helps the lap sit flat and seal better.
For the house itself we usually steer people to 5V or standing seam, and we will tell you plainly which fits your building best.
Step by step
We confirm purlin spacing and condition before ordering panel lengths.
Panels are ordered in single runs whenever possible to avoid end laps.
Side laps get butyl tape and stitch screws, and fasteners land on the purlins.
Rake, eave and ridge trim with foam closures keep birds and wind-blown rain out.
Options
Standard profile for open framing and budget builds.
Purlin bearing rib at the lap for a flatter, tighter seal.
Adds a vapor barrier and quieter interior on open-frame buildings.
Typical r-panel metal roofing cost in Orlando: per sq ft installed on open framing. Final price depends on roof size, pitch, access and what we find under the old roofing.

PBR has an extra leg at the overlap that bears on the purlin. It sits flatter and seals better, so we use it on most steel buildings.
Sometimes. A retrofit sub-framing system can go over sound old panels, which saves tear-off and keeps the building in use.
Rarely on the main house. It works well on garages, shops and covered patios where the ribbed look fits.
Related work
Standing seam is the metal roof most Orlando homeowners picture: smooth panels, raised seams, and no exposed screws for the sun and rain to work on.
Standing Seam Metal Roofing details5V crimp is the old Florida metal roof, the one you still see on cracker houses around Lake County, and it remains one of the most affordable metal options for an Orlando home.
5V Crimp Metal Roofing detailsA metal roof replacement takes off what is up there now, shingle, tile or old metal, and puts down a new panel system built for Central Florida weather.
Metal Roof Replacement detailsStone-coated steel gives you the look of shingle, shake or barrel tile with the weight and wind resistance of a steel roof.
Stone-Coated Steel Roofing detailsReal roofers answer 24/7, and we come out to Orlando and the nearby cities every day of the week.