Standard reseal
Same size screws with new washers where holes are tight.
Metal roofing
Exposed-fastener metal roofs rely on thousands of rubber washers, and in Florida sun those washers dry out and crack long before the panels wear out.

Done every 15 to 20 years, this is the single best thing you can do for an exposed-fastener roof. Typical cost in Orlando runs $1.35 to $2.20 per sq ft of roof area for full replacement, and the roof line answers 24/7 at (407) 783-0064.
A screw replacement visit goes row by row across the roof, backing out each fastener and driving a new screw with a fresh EPDM washer, often one size up so it bites into clean metal. On a typical 5V or R-panel house roof that is several thousand screws.
It costs a fraction of a re-roof and stops the slow leaks that rot decking from the top down.
Step by step
We pull a few screws to check the washer and the hole condition.
Every fastener is replaced, upsizing where the hole is wallowed out.
Side laps and trim screws get the same treatment.
Metal shavings are swept off so they cannot rust spots into the finish.
Options
Same size screws with new washers where holes are tight.
One size up for holes that have worn wide.
Coated or stainless screws with high-grade washers for longer service.
Typical metal roof screw replacement cost in Orlando: per sq ft of roof area for full replacement. Final price depends on roof size, pitch, access and what we find under the old roofing.

Most homes take one to two days. Larger outbuildings may take three.
If the finish is chalking or rusting, a coating after the screw swap makes sense. If the paint is sound, screws alone are enough.
Steel shavings left on the roof rust within days and leave orange stains that can eat into the finish.
Related work
Standing seam is the metal roof most Orlando homeowners picture: smooth panels, raised seams, and no exposed screws for the sun and rain to work on.
Standing Seam Metal Roofing details5V crimp is the old Florida metal roof, the one you still see on cracker houses around Lake County, and it remains one of the most affordable metal options for an Orlando home.
5V Crimp Metal Roofing detailsR-panel and PBR metal roofs cover a lot of square footage for the money, which is why they are on so many shops, barns and commercial buildings around Orange and Lake County.
R-Panel Metal Roofing detailsA metal roof replacement takes off what is up there now, shingle, tile or old metal, and puts down a new panel system built for Central Florida weather.
Metal Roof Replacement detailsReal roofers answer 24/7, and we come out to Orlando and the nearby cities every day of the week.