Silicone coating
Handles ponding water and keeps its reflectivity in sun.
Metal roofing
A restoration coating can add years to a metal roof that is chalking, fading or showing surface rust, without tearing anything off.

Coatings are a fit when the panels are still sound. Typical cost in Orlando runs $3.10 to $5.65 per sq ft for wash, prep and coating, and the roof line answers 24/7 at (407) 783-0064.
The work starts with a pressure wash and rust treatment, then a seam and fastener sealing pass, then a primer and a fluid-applied coating, usually silicone or acrylic, rolled or sprayed to a measured thickness. The result is a bright, reflective surface that also seals the small gaps that cause leaks.
If the metal is rusted through in spots, we patch those first or tell you honestly that replacement is the better money.
Step by step
The roof is cleaned and rust spots are treated and primed.
Seams, laps and fasteners get a reinforced sealant pass.
Coating goes on at a measured mil thickness, checked as we go.
We spot-check thickness and touch up any thin areas.
Options
Handles ponding water and keeps its reflectivity in sun.
Lower cost and easy to recoat later, best on well-drained slopes.
Required on any panel showing corrosion before topcoat.
Typical metal roof restoration and coating cost in Orlando: per sq ft for wash, prep and coating. Final price depends on roof size, pitch, access and what we find under the old roofing.

Most systems we apply are rated for 10 to 15 years and can be recoated when they wear.
It seals seams and fasteners, which cause most leaks. Holes and failed flashing get repaired before coating.
A reflective white roof can cut heat gain into the space below, especially on buildings with little attic insulation.
Related work
Standing seam is the metal roof most Orlando homeowners picture: smooth panels, raised seams, and no exposed screws for the sun and rain to work on.
Standing Seam Metal Roofing details5V crimp is the old Florida metal roof, the one you still see on cracker houses around Lake County, and it remains one of the most affordable metal options for an Orlando home.
5V Crimp Metal Roofing detailsR-panel and PBR metal roofs cover a lot of square footage for the money, which is why they are on so many shops, barns and commercial buildings around Orange and Lake County.
R-Panel Metal Roofing detailsA metal roof replacement takes off what is up there now, shingle, tile or old metal, and puts down a new panel system built for Central Florida weather.
Metal Roof Replacement detailsReal roofers answer 24/7, and we come out to Orlando and the nearby cities every day of the week.