Skip to content
Bright SunMetal Panels & RoofingRoof line, 24/7(407) 783-0064

Roof Know-How

Standing seam vs 5V crimp: which metal roof fits an Orlando home?

EWBy Ethel Wickham, Roof Know-How Editor. Updated October 21, 2026.

Most people who call us about metal have already narrowed it down to two panels: standing seam and 5V crimp. Both are proven in Central Florida. The right one depends on budget, the look you want, and how much upkeep you are willing to do over the years.

Side by side comparison of standing seam and 5V crimp metal roof panels on Florida homes

The short version

Standing seam costs more up front and needs almost nothing for decades, because its fasteners are hidden under the seams. 5V crimp costs less and looks like a classic Florida roof, but its screws are exposed and need service roughly every 15 to 20 years.

On a typical one-story Orlando home, the price gap between the two often lands somewhere around 25 to 40 percent, depending on panel gauge and finish.

How each panel keeps water out

Standing seam panels lock together at raised seams that sit well above the flat of the roof. Clips hold the panels to the deck and let them expand and contract in the heat without stressing a screw hole. Water runs down the flats and never touches a fastener.

5V sheets overlap at a side rib and are screwed through the face into the deck. Each screw has a rubber washer that seals the hole. The system works well, but the washers are exposed to sun all day and slowly harden. That is why fastener service is part of owning a 5V roof.

Hidden clip under a standing seam panel next to an exposed screw on a 5V panel
Hidden clip under a standing seam panel next to an exposed screw on a 5V panel.

Looks and neighborhood fit

Standing seam reads clean and modern, and in darker colors it suits historic homes in places like Lake Eola Heights and Delaney Park too. 5V has the Old Florida farmhouse look that fits rural Lake County, Apopka acreage and cracker-style builds.

If you are in an HOA, check the guidelines first. Some communities allow metal but specify a color family or a profile.

Storm performance

Both can carry strong wind ratings when installed to the tested pattern over a solid deck. The weak points are usually the edges and ridge, not the panels themselves, so trim attachment matters as much as the panel choice.

Standing seam has an edge in sideways rain because there are no face fasteners for wind to push water past. On a well-kept 5V roof that difference is small.

Which we suggest most often

If you plan to stay 15 years or more and want the least upkeep, standing seam is usually worth it. If budget is tight, the house has a simple roofline, or you like the classic look, 5V is a smart roof that will serve for decades with a little care.

Quick follow-ups

Can I switch from 5V to standing seam later?

Yes, it is a full re-roof. Most owners just choose the one they want from the start.

Does panel color matter for heat?

Lighter and cool-rated finishes reflect more sun and keep the attic cooler.

Services in this guide

Standing Seam Metal Roofing

Standing seam is the metal roof most Orlando homeowners picture: smooth panels, raised seams, and no exposed screws for the sun and rain to work on.

Standing Seam Metal Roofing details

5V Crimp Metal Roofing

5V crimp is the old Florida metal roof, the one you still see on cracker houses around Lake County, and it remains one of the most affordable metal options for an Orlando home.

5V Crimp Metal Roofing details

Metal Roof Screw Replacement

Exposed-fastener metal roofs rely on thousands of rubber washers, and in Florida sun those washers dry out and crack long before the panels wear out.

Metal Roof Screw Replacement details

Roof trouble today? Call the roof line.

Real roofers answer 24/7, and we come out to Orlando and the nearby cities every day of the week.

(407) 783-0064
Call (407) 783-0064