Metal Roof Replacement
A metal roof replacement takes off what is up there now, shingle, tile or old metal, and puts down a new panel system built for Central Florida weather.
Metal Roof Replacement detailsRoof Know-How
Metal roof prices get quoted per square foot, but two houses of the same size can land thousands of dollars apart. Here is what actually drives the price on Orlando homes, so you can read a quote with a clear eye.

For a single-story Orlando home with tear-off included, 5V crimp commonly falls around $8 to $13 per square foot of roof, stone-coated steel around $11 to $16, and standing seam around $12 to $17. Our current figures for each are on roof prices page.
Roof square footage is not floor square footage. Overhangs, pitch and porches add area, so a 2,000 square foot house often has 2,400 to 2,800 square feet of roof.
Every hip, valley, dormer and wall line adds trim, labor and waste. A simple gable roof is the cheapest to cover. A hip roof with several valleys and a couple of dormers can add 15 to 25 percent.

Removing one layer of shingles is the baseline. Tile tear-off costs more because tile is heavy and slow to remove. Two layers of old roofing add disposal and labor.
We cannot see the deck until the old roof is off, so good quotes list a per-sheet price for replacement. Older Orlando homes with plank decks, or homes with long-running leaks, can need more.
Heavier gauge, painted finishes and mechanically seamed panels all cost more. Bare Galvalume is the lowest cost finish. Painted finishes add color and better fade resistance.
Permits, skylight work, gutters, ventilation upgrades and roof hardening are all extras that should be listed separately so you can compare quotes fairly.
Over 30 or 40 years, metal usually comes out ahead because shingles in Florida often need replacing two or three times in that span. Our lifetime cost tool shows the math for your numbers.
Different panel systems, different deck allowances and what is or is not included. Ask for each item to be listed.
A metal roof replacement takes off what is up there now, shingle, tile or old metal, and puts down a new panel system built for Central Florida weather.
Metal Roof Replacement detailsStanding seam is the metal roof most Orlando homeowners picture: smooth panels, raised seams, and no exposed screws for the sun and rain to work on.
Standing Seam Metal Roofing detailsStone-coated steel gives you the look of shingle, shake or barrel tile with the weight and wind resistance of a steel roof.
Stone-Coated Steel Roofing detailsReal roofers answer 24/7, and we come out to Orlando and the nearby cities every day of the week.